Seamax Ocean380T 12.5 Feet Heavy Duty Inflatable Boat

Description

Seamax Ocean380 12
5 Feet Heavy Duty Inflatable Boat
Max 5 Passengers & Rated 25HP
Commercial grade boat fabric for main construction
Four layers overlapped chamber seam structure (Feature Code: FOS)
Keel Center Inner Reinforcement (KCR)
Transom Stabilizer & Reinforcement Design (TSR)
Seamax special feature also including: Dual Heavy duty life lines
Heavy duty boat bumper around the boat and bottom
Heavy duty D-Ring & Towing Ring patches and marine reflective tape
15” Short Shaft Version Available Color: Red / Dark Gray / Black
20” Long Shaft Version Available Color: Dark Gray
SPECIFICATIONS
Overall length 12
5ft
beam 5
7ft
inner dimension L 9
0ft x W 2
8ft
Boat dry weight 210Lbs
carry 7 passengers
max
loading 1432Lbs
Pontoon diameter 17
5 inches
5 pontoon chambers and 1 keel chamber
max
pressure 3
6PSI (25kPa)
Aluminum floor & reinforced V bottom
Short shaft 16”/ 82° & reinforced transomMax
25HP motor
suggested 15-20HP
Pontoon chambers finished with 4 layers and triple overlapped chamber seam
double thermal welded structure with industry best 6 years guarantee
Non-skid sectional aluminum floor system with side joiners
Fuel tank and battery box tie down fitting on the floor
heavy duty transom motor pad and pontoon towing rings
fully 3 Layer reinforced transom adaptor
and marine sealant applied to resist leakage
Multiple D-ring kits installed on the inside of the pontoons
3 x front towing rings with tow line
Full size towing rings on transom
4 x heavy duty handles
Oar lock set installed
2 position seat receiver
2x bench seats
2 aluminum oars
2 heavy duty boat carrying bags (for hull & floorboard)
foot pump
boat repair kit & spare parts
Reflective Plates (optional) – US Coast Guard Approved 3M Reflective Sheeting
Color Code: White USCGFP30 (Sliver)
Dimension 3”x10” / 5Pcs
This Ocean380T 12
5ft inflatable boat shipment has 2 packages and total weight about 270Lbs
Hull package dimensions are 50x27x16”
and Floor package dimensions are about 44x25x9”
If boat trailer is needed
please visit EZ Load trailer website to locate your closed dealer
SEAMAX OCEAN380T SPECIAL FEATURES 1
4 layers overlap seam finishing is the strongest seam construction standard in the inflatable boat industry
The 2 main chamber fabrics are real-bonded together with ½” overlapping
Extra seam tapes on both sides of chamber to reinforce the main seam
Overall thickness of the 4-layers chamber seam is 5mm in total
Our chamber seam technology gives the boat a longer life time comparing with many others
SEAMAX OCEAN380T SPECIAL FEATURES 2
Seamax always focuses on high manufacturing standards
A rigid transom is very important for inflatable boats
Beside using solid birch plywood to build transom
we develop a new standard called Transom Stabilizer Reinforcement (TSR) to help the pontoon to disperse motor vibration and weight
The reinforcement technology extends the overall life time of the inflatable boat
SEAMAX OCEAN380T SPECIAL FEATURES 3
Hull Stabilizer Bar (HSB) is designed by Seamax and first applied in an 18ft government boat project
Now Seamax HSB 2
0 is available on every Seamax Ocean T model
Located near the front deep V-Hull
the specially made HSB greatly helps stabilize the boat structure
The tension along the HSB creates an invisible force triangle to stabilize the front Hull and keep the floor in place
Such a triangle inner support for the hull is a great boat add-on feature
A boat with HSB also has a better high speed boating performance
About Seamax Air Chamber Seams
When we talking about the latest air chamber seam standard
Hot (Air) Welded and Thermal Bonded are belong to the same type of seam processing
The main chamber seam staying together is not longer using the PVC glue
So the air chamber seam won’t be damaged when time being or daily use
Since the PVC glue life time is 3-10 years based on workmanship and condition of use
Hot welded (or Thermo welded) seam may reduce over 50% of boat major repair service and be able to extend the boat life time to be over 10-15 years
Seamax has been making our Ocean Series and Ocean T Series inflatable boat with hot welded seam since 2017
And we use the over-lapped major seam structure let the chamber fabric staying together by themselves and not using an additional seam tape
Seamax still use seam tape as add-on with best result
It seems like we give the boat an extra welded seam
and we call it Double Hot Welded
The PVC boat industry standard is joined chamber seam
I believe it should give a higher chance of air leaking after finished
Usually
the same style over-lapped major seam structure can be found from high-end Hypalon boats
Boat using over-lapped seam will use more material to build and many extra hours
At the mean time it requires better skill worker to make it right
Now we can be confident to tell that our chamber seam’s life time will be as the same as the fabric’s life time
In the other word
when the day the boat life time ended
it should not be from the chamber seam issue
Right now
all our Seamax boats manufacturing are the same
Hot welded seam for PVC boat brings the boat overall quality much closer to Hypalon boat
And Seamax boat with German PVC to build can bring Seamax with a highest standard in the inflatable boat industry